Zilog Z51F3221 Instrukcja Użytkownika Pobierz pdf (Strona 25)

UM025801-1112 Configure the Z8051 OCD and Z51F3221

Z51F3221 Development Kit

User Manual

4. Using the second USB-to-Mini-B cable, connect the standard USB end to the host

PC’s USB port.

5. Connect the other end of this second Mini-B cable to the Z51F3221 Board’s P1 con-

nector to apply power to the Board. Note that the green LED D5 is ON; see Figure 14.

In the event that you later remove the LCD panel from the Board, observe its orientation in

Figure 14. The panel’s small plastic notch should be located in the position indicated by the

red square.

Figure 15 shows an example of a completed hardware and software setup.

Figure 14. Connecting the USB Mini-B Cable to the Board

Note:

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 54 55

Brak uwag

Zilog Z51F3221 Instrukcja Użytkownika Strona 25