Zilog Z16F2810 Instrukcja Użytkownika Pobierz pdf (Strona 8)

USB Smart Cable

User Manual

UM018114-0513 USB Smart Cable

Programmer for the first time. If you are prompted to connect to Win-

dows Update, click

No, not at this time.

2. Select

Install from a list or specific location (Advanced), then click

Next. If the Windows Logo testing dialog appears, select Continue

Anyway

3. Select

Search for the best driver in these locations and Include

this location in search:

, then locate and click the following direc-

tory:

<ZDS installation>\device drivers\USB\x32

4. Click Next. After the appropriate driver information has been found,

click

Next a second time.

5. Click

Finish to complete the installation.

Connecting to the Target Board

Observe the following steps to complete the power-on sequence before

connecting to the target.

1. Connect the USB Smart Cable to the host PC.

2. Connect the USB Smart Cable six-pin connector to the target board.

3. Apply power to the target board. If the target is not connected prop-

erly, remove the USB Smart Cable from the host PC and repeat the

preceding steps. If the connection is problematic, refer to the Trouble-

shooting Tips section, which follows on the next page.

4. Attach one end of the six-conductor ribbon cable to the Smart Cable

six-pin DBG connector, as shown in Figure 1. Attach the free end of

the ribbon cable to the connector on the target board. Ensure that pin

1 on the ribbon cable (indicated by the dark stripe) is aligned with pin

1 on the target connector.

1 2 3 4 5 6 7 8 9 10 11

Brak uwag

Zilog Z16F2810 Instrukcja Użytkownika Strona 8