Zilog ZMOT0BHH Instrukcja Użytkownika Pobierz pdf (Strona 21)

UM023902-1013 17

ZMOTION

20-Pin Detection and Control Development Kit

User Manual

4. Make sure that the ZMOTION 20-Pin Development Board is powered OFF, then con-

nect the USB SmartCable (Debugger) to P2, as described above.

5. Ensure that the J8 jumper is closed in position 1–2, to control the USB power supply.

6. Apply power to the Development Board by plugging in the USB cable and setting SW1

to the ON position. Next, click the

Reset icon in ZDS II. Figure 14 indicates the loca-

tion of both the

Reset and Go icons in the ZDS II menu bar.

Figure 12. Building the ZMOTION_Serial_Config project in ZDS II

Figure 13. The Location of the Rebuild All Icon

The Rebuild All icon

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 33 34

Brak uwag

Zilog ZMOT0BHH Instrukcja Użytkownika Strona 21